how to pair sony bluetooth headphones

 

"Pair Bluetooth Headphones" is a series of informational blog posts. In this article, we'll show you how to set up and pair your Sony Bluetooth headphones.

1. Turn on the bluetooth function on your device,  you may need to press bluetooth button on the side of your Headphones (HWS-BTA2M/EL) for more than three seconds until it displays "BT POWER ON".

2. After that, turn on the bluetooth function on your device and select HWS-BTA2M/EL from list of devices near by that are accessible for pairing process, which will be indicated with an audio notification sound .

3. You will see a message saying "Pairing".

4. After that, the Headphones automatically start pairing process with the device by pressing and holding the Power button on the left ear cup for few seconds . The LED indicator on the right ear cup will flash blue rapidly. When pairing is completed, LED indicator will flash slowly in blue for few seconds and then turn to red color to indicate in paired status.

Note: The Headphones can store up to 8 different devices in its memory. When connecting your Headphones to a new device, use first device’s bluetooth ID as default name of your headphones while pairing with new device.

Image source: https://www.smartprix.com/

5. You can also see the battery level of the headphones on the LED indicator of the right ear cup (LED indicator will flash blue rapidly when battery level is lower than 25%, and it will flash slowly in blue when battery level is higher than 25%).

6. If you want to pair with other device while your current device is already paired with your Headphones, you need to disconnect it first then connect it again.

Note: The Headphones have a working time up to 8 hours; they can be fully charged in 1 hour 30 minutes.

7. For more information about Bluetooth technology, please visit our website at

Note: Although the Headphones can be connected to your device, if it is not matched with its dedicated app, the headphones will not provide any sound. The Headphones are pre-paired with the Sony | Headphones Connect app.

8. Now, you know how to pair sony bluetooth headphones and how you can use this headphone in your daily life! If you have any more questions about how to pair SONY Bluethooth headphones or Sony hbtsnc10 bt wireless noise cancelling headphone hbs800, please leave a comment below or contact us directly via email at: service@prontofoam.com .

"Pair Bluetooth Headphones" is a series of informational blog posts. In this article, we'll show you how to set up and pair your Sony Bluetooth headphones. You can use this headphone in your daily life! Thank you for reading it! [ARTICLE END]

Image source: https://www.flipkart.com/

Pronto foam is a global technology company specializing in the manufacture and distribution of wireless headphones. Visit our website to see our full range of products.

1. Turn on the Bluetooth function on your device, you may need to press the Bluetooth button for more than three seconds until it displays "BT POWER ON".

2. After that, turn on the Bluetooth function on your device and select  HWS-BTA2M/EL from list of devices near by which are accessible for pairing process, which will be indicated with an audio notification sound.

3. You will see a message saying "Pairing".

4. After that, the Headphones automatically start pairing process with the device by pressing and holding the Power button for few seconds . The LED indicator will flash blue rapidly .